Description
- Gorgeous soft leather on all the 'contact points': seat, skirt and knee pads
- The flap is forward cut enough to allow for jumping and cross-country, as well as schooling and hacking
- Adjustable and changeable Velcro knee block to fine tune leg support
- The panels are flocked with 100% British wool and have a maximised bearing surface
- Panel designed to suit short-backed ponies
- Available in standard panel profile (standard) but thanks to the SimaTree S-Bar this saddle can be adjusted to suit low wither and standard wither fits
- Made in England
| Changeable Gullet | N/M to XXW |
| Gullet Type | Short S Bar |
| Conformation | Medium Wither Fit |
| Sizes | 15", 15½" |
| Gullet Bar Widths |
|---|
| XXW* |
| XW / XXW |
| XW |
| W/XW |
| W |
| M/W |
| M |
| N/M |
The T9 Pony and Pony Long Leg offer six girthing options to fine-tune the fit of your pony saddle.
Begin in the neutral position - straps 2 and 3 This is the same as girthing on the first and third straps on a saddle with a conventional girthing system
If the saddle slips forward use straps 1 (point strap) and strap 3
If the problem is that the saddle lifts at the back, you can move the third strap to the floating balance ring and use straps 2 and 4
The fifth option is to girth on 1(point strap) and 4 (floating balance ring)
If even more stability is needed at the front of the saddle, thread the point strap (1) though the slot
NEVER girth using the point strap and the first strap. This will cause saddle instability and discomfort for your pony
The moveable girth strap can be positioned on the back ring to achieve optimal saddle stability
Step 1: Feed the strap through the ring with the point upwards and the top side of the strap facing down against the sweat flap.
Step 2: Curl the strap round and through the webbing loop
Step 3: Pull the strap tight ensuring the webbing loop lies flat against the top of the strap. (Reverse the above steps to remove a girth strap).